Carpentry

From MeritBadgeDotOrg

(Difference between revisions)
Jump to: navigation, search
(Requirement resources)
(Related awards)
Line 28: Line 28:
-
== Related awards ==
+
 
-
<!-- --------------------------------------------------------------- -->
+
-
<!-- Note similarities with other award requirements here such as: -->
+
-
<!-- * [[other award]] requirement ## -->
+
-
<!-- --------------------------------------------------------------- -->
+
-
{{Historical Merit Badges}}
+
-
<br>
+
== History: 1938, 1945, 1950 merit badge requirements ==
== History: 1938, 1945, 1950 merit badge requirements ==

Revision as of 18:10, January 2, 2011

Carpentry merit badge
Status: Discontinued BSA Advancement ID:
Created: 1911, 2010 Original/new/replaced:
Discontinued: 1952, 2010 Replaced by:

Contents

[[Category:Discontinued {{{group}}} merit badges]]

The Carpentry merit badge was one of the original 57 merit badges issued by the Boy Scouts of America in 1911.



Carpentry requirements

  1. Demonstrate the use of the rule, square, level, plumb-line, mitre, chalk-line and bevel.
  2. Demonstrate the proper way to drive, set, and clinch a nail, draw a spike with a claw-hammer, and to join two pieces of wood with screws.
  3. Show correct use of the cross-cut saw and of the rip-saw.
  4. Show how to plane the edge, end and the broad surface of a board.
  5. Demonstrate how to lay shingles.
  6. Make a simple article of furniture for practical use in the home or on the home grounds, finished in a workmanlike manner, all work to be done without assistance.



The text of these requirements is locked and can only be edited
by an administrator.
Please note any errors found in the above requirements on this article's Talk Page.





History: 1938, 1945, 1950 merit badge requirements

Historical Carpentry merit badge.
Historical Carpentry merit badge.
  1. Demonstrate the use of the rule, square, level, plumb-line, mitre, chalk-line and bevel.
  2. Demonstrate the proper way to drive, set, and clinch a nail, draw a spike with a claw-hammer, and to join two pieces of wood with screws.
  3. Show correct use of the cross-cut saw and of the rip-saw.
  4. Show how to plane the edge, end and the broad surface of a board.
  5. Demonstrate how to lay shingles.
  6. Make a simple article of furniture for practical use in the home or on the home grounds, finished in a workmanlike manner, all work to be done without assistance.

See also

Boy Scout portal
Varsity Scout portal
Venturing portal
General Merit Badge information


External links


Personal tools
language